Mold removal McKinney
Mold Remediation & Mold Removal in McKinney, TX
Mold almost always follows water. Here is how mold remediation works in McKinney, what Texas law requires, and how to tell whether a musty smell means a bigger problem behind the walls.
Mold and water damage go together
Mold remediation is the process of containing an area with mold growth, removing the contaminated materials, cleaning the remaining surfaces with HEPA vacuums and damp wiping, and drying the area so mold cannot return. In Texas, remediation of 25 contiguous square feet or more must be done by a company licensed by the Texas Department of Licensing and Regulation.
Mold spores are everywhere, indoors and out. They only become a problem when they land on something that stays damp. Drywall paper, wood, carpet backing, insulation and dust all feed mold, and in a North Texas summer the indoor conditions are warm enough for growth to start within 24 to 48 hours of a leak.
That is why mold remediation and water damage restoration are so closely linked. Remediating mold without fixing the moisture source simply means it comes back. And drying a building quickly after a leak is the best way to avoid needing remediation at all. If you have a fresh leak, start with our page on water extraction and drying, or go back to the main page on water damage restoration services.
What Texas law requires
Texas is one of the few states with a full mold licensing program. The rules, administered by the Texas Department of Licensing and Regulation (TDLR), apply when the mold covers 25 contiguous square feet or more. In those cases:
- A licensed mold assessment consultant inspects the property and writes a mold remediation protocol that describes exactly what must be removed and how.
- A licensed mold remediation contractor does the work according to that protocol. The same company cannot do both the assessment and the remediation on the same project.
- After the work, a clearance assessment by the assessor confirms the remediation was successful.
- The homeowner receives a Certificate of Mold Damage Remediation, which is useful when you sell the house.
You can check a license number on the TDLR website. Ask for it before work starts. For small areas under 25 square feet, a homeowner can do the cleanup, but containment and protective equipment are still a good idea.
Signs of mold in a McKinney home
| What you notice | What it may mean |
|---|---|
| Musty, earthy smell | Mold growing somewhere damp, often inside a wall, under flooring or in the HVAC |
| Black, green or white spotting on drywall | Visible growth, often with more behind it |
| Spotting on the back of baseboards | Water reached the bottom of the wall |
| Peeling or bubbling paint | Moisture behind the surface |
| Allergy symptoms that improve when you leave home | Possible indoor mold exposure, talk to a doctor |
| Mold around AC vents or the air handler closet | Condensation problem in the HVAC system |
In McKinney, mold calls often trace back to slow leaks under sinks, attic water heater pans, AC condensate lines that back up during summer, and bathrooms without good exhaust fans. Ceiling leaks are a common source too, see our page on burst pipe and ceiling leak damage.
How professional mold remediation works
Assessment
A licensed assessor inspects, may take air or surface samples, and writes the remediation protocol for larger jobs.
Containment
The work area is sealed with plastic sheeting and kept under negative air pressure with HEPA air scrubbers so spores do not spread through the house.
Fix the moisture source
The leak, condensation problem or drainage issue has to be repaired, or the mold will return.
Removal
Moldy drywall, insulation, carpet and other porous materials are bagged and removed. Workers wear respirators and protective suits.
Cleaning
Framing and hard surfaces are HEPA vacuumed and damp wiped. Sanding or soda blasting may be used on wood framing.
Drying and clearance
The area is dried, then the assessor performs a clearance check before rebuilding starts.
Mold in HVAC systems and attics
In McKinney, air conditioners run for much of the year, and every system produces condensation. That water drains from the evaporator coil into a pan and out through a condensate line. When the line clogs with algae, the pan overflows into the attic or the air handler closet, and the warm, dark space becomes a perfect place for mold.
Signs include a musty smell when the AC starts, water stains on the ceiling below the air handler, and visible growth on the insulation around the unit. Attic mold can also form on the underside of the roof decking when bathroom fans vent into the attic instead of outdoors, or when a roof leak has gone unnoticed.
HVAC mold needs both a remediation company and an HVAC technician. Cleaning the ductwork alone does not help if the drain problem is not fixed.
What remediation looks like in your home
Homeowners are often surprised by how a remediation job looks. Expect the work area to be closed off with plastic sheeting and a zippered door, with a flexible duct running to a window or door to exhaust filtered air. Workers wear full protective suits and respirators. The air scrubbers run continuously and are fairly loud.
Most small and medium jobs take one to five days of work, followed by drying and the clearance check. The rest of the home is usually livable during the work, because the containment keeps spores in the work area. Keep doors to the containment closed and do not remove the plastic until the clearance assessment is complete.
Mold and your health
Most people exposed to small amounts of mold have no serious problems, but mold can trigger allergy symptoms such as sneezing, a runny nose, itchy eyes and coughing, and it can make asthma worse. People with weakened immune systems or chronic lung conditions are at greater risk. The CDC and EPA advise removing mold growth and fixing the moisture problem rather than testing to identify the exact species. If anyone in your home has symptoms that seem to improve when they are away from the house, talk with a doctor and mention the possible exposure.
How to keep mold from coming back
- Dry any leak within 24 to 48 hours, using professional equipment if water reached walls or flooring
- Keep indoor humidity under about 50 percent, especially in summer
- Run bathroom exhaust fans during showers and for 20 minutes after
- Have the AC condensate line flushed and the drain pan checked every year
- Check the attic water heater drain pan and line once a year
- Fix roof leaks quickly after hailstorms
If mold followed a sewer backup, the cleanup has extra steps, see our sewage cleanup page. Mold after a fire is also common, because of the water used to put the fire out.
Questions
Mold questions from McKinney homeowners
Do I need a licensed company to remove mold in Texas?
If the mold covers 25 contiguous square feet or more, yes. Texas requires a licensed mold assessor to write a protocol and a separate licensed remediation contractor to do the work. Smaller areas can legally be handled by the homeowner.
Can mold grow after a leak in just a couple of days?
Yes. On damp drywall, wood and carpet backing, mold can begin growing within 24 to 48 hours, especially in warm conditions. That is why quick drying matters so much.
Will painting over mold fix it?
No. Paint does not stop mold growing underneath, and the moisture source is still there. The mold will come back through the paint. The material needs to be cleaned or removed and the area dried.
Is mold remediation covered by homeowners insurance?
When mold results from a covered sudden water loss, such as a burst pipe, some or all of the remediation may be covered. Many Texas policies limit or exclude mold from long-term leaks or humidity. Check the mold section of your policy.
Should I test for mold?
If you can see it, testing usually is not needed to know it is there. Testing is helpful when you smell mold but cannot find it, and it is part of the clearance step after larger remediation jobs.
Can I stay home during mold remediation?
In most cases, yes. The work area is sealed off and kept under negative pressure so spores do not spread. People with asthma, allergies or weakened immune systems may want to stay elsewhere during the removal stage.
How do I check a mold company's Texas license?
Ask for the license number and look it up on the Texas Department of Licensing and Regulation website. Assessors and remediation contractors hold different licenses.
24-hour phone line
Musty smell or visible mold?
Call and you will be connected with a McKinney company that handles mold after water damage and can explain the Texas licensing steps.